Ingenico 5100 Operating Manual page 56

SKYZER TECHNOLOGIES
SELECT TYPE SELECT TYPE
10.0 SELECT TYPE SELECT TYPE
1. MOTO 1. MOTO 1. MOTO 1. MOTO
2. UNSECURE ECOM 2. UNSECURE ECOM
2. UNSECURE ECOM 2. UNSECURE ECOM
11.0 1. SINGLE 1. SINGLE 1. SINGLE 1. SINGLE
2. RECURRING 2. RECURRING
2. RECURRING 2. RECURRING
3. INSTALLMENT 3. INSTALLMENT 3. INSTALLMENT 3. INSTALLMENT
4. UNKNOWN 4. UNKNOWN
4. UNKNOWN 4. UNKNOWN
AWAITING ACCOUNT AWAITING ACCOUNT AWAITING ACCOUNT AWAITING ACCOUNT
12.0
ACCOUNT ACCOUNT
13.0 ACCOUNT ACCOUNT
CHQ CHQ CHQ CHQ SAV SAV SAV SAV
16.0
PROCESSING NOW PROCESSING NOW
PROCESSING NOW PROCESSING NOW
ACCEPTED ACCEPTED ACCEPTED ACCEPTED
17.0
DECLINED DECLINED
18.0 DECLINED DECLINED
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE
Select the Transaction Type by pressing the corresponding number key:
1. MOTO (Mail order Telephone Order)
2. Unsecure ECOM (Electronic Commerce .e.g. Internet)
If 1 is pressed, then follow through to step 11.0.
If 2 is pressed, then follow through to step 12.0
Select option by pressing the corresponding number key:
1. SINGLE
2. RECURRING
3. INSTALLMENT
4. UNKNOWN
The terminal waits on the account selection from the pinpad.
$XX.XX $XX.XX
$XX.XX $XX.XX The pinpad will prompt for account selection. Select the CR account on the pinpad.
CR CR CR CR
PROCESSING NOW will be displayed on the terminal and pinpad. Terminal will
now automatically connect to the Host and complete the transaction.
Transaction has been ACCEPTED and prints the transaction receipt.
Transaction has been DECLINED and prints the transaction receipt.
PAGE 56 OF 97
Version 1.3