Remote Key Injection (Pkms) Initialisation - Ingenico 5100 Operating Manual

SKYZER TECHNOLOGIES

3.7.2 Remote Key Injection (PKMS) Initialisation

This function allows the Paymark security keys to be injected into the terminal
through the following steps below.
Step Terminal Display Description
1.0
FUNCTION? FUNCTION? FUNCTION? FUNCTION?
2.0
3.0 RKI RKI RKI PASSWORD? RKI PASSWORD? PASSWORD? PASSWORD?
4.0 REMOTE INIT REMOTE INIT REMOTE INIT REMOTE INIT
IN PROGRESS IN PROGRESS IN PROGRESS IN PROGRESS
PROCESSING NOW PROCESSING NOW
5.0 PROCESSING NOW PROCESSING NOW
ACCEPTED ACCEPTED ACCEPTED ACCEPTED
6.0
After a successful RKI (PKMS) key injection into the terminal, restart the terminal
by performing the steps below:
Step Terminal Display Description
1.0
2.0 FUNCTION? FUNCTION? FUNCTION? FUNCTION?
RESTART RESTART
3.0 RESTART RESTART
TERMINAL? TERMINAL?
TERMINAL? TERMINAL?
Once the terminal boots up, a merchant logon (Page 47) can been initiated
and successfully completed with an ACCEPTED response, the terminal is ready
to process transaction.
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE
Press FUNC.
Key in 87 and press ENTER
Key in 6987 and press ENTER
Terminal starts to download remote keys into the terminal from the Paymark host.
Terminal has begun to download the keys into the terminal.
RKI logon was successful to download the keys to the terminal. After this, restart
the terminal by pressing FUNC 86 followed by ENTER twice.
Press FUNC.
Enter 86 and press ENTER.
Press ENTER to restart the terminal or CLEAR to cancel and return to idle screen.
PAGE 41 OF 97
Version 1.3