Port Layout; Figure 6 - Port Layout For Ingenico 5100 - Ingenico 5100 Operating Manual

SKYZER TECHNOLOGIES

2.2.5 Port Layout

The following ports are as defined at the rear of the Ingenico 5100 terminal.
Power Port
PSTN/Telephone
Port
Note: The SkyPay-300 reader can be connected to either ports, RS232-1 or
RS232-2 as long as it's been activated for that port. Refer to page 37 for
instructions on activating the SkyPay-300 reader port to operate on.
If the SkyPay-300 reader is activated on RS232-2 port, then the ECR interface
cannot be enabled due to RS232-2 port in use by SkyPay-300 reader.
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE
Figure 6 – Port Layout for Ingenico 5100
PAGE 18 OF 97
Pinpad/SkyPay-300
Port
ECR Interface/SkyPay-300
Port
Ethernet Port
Version 1.3