Master Memory Reset - Ingenico 5100 Operating Manual

SKYZER TECHNOLOGIES

3.4.1 Master Memory Reset

This function allows the merchant to reset the memory of the entire active
merchants on the terminal.
Step Terminal Display Description
1.0
2.0 FUNCTION? FUNCTION? FUNCTION? FUNCTION?
3.0 MULTI MERCHANT MULTI MERCHANT MULTI MERCHANT MULTI MERCHANT
SETUP SETUP SETUP SETUP
4.0
DELETE CONFIG? DELETE CONFIG? DELETE CONFIG? DELETE CONFIG?
ENTER=YES,CLR=NO ENTER=YES,CLR=NO ENTER=YES,CLR=NO ENTER=YES,CLR=NO
4.1
ARE YOU SURE? ARE YOU SURE? ARE YOU SURE? ARE YOU SURE?
ENTER=YES, CLR=NO ENTER=YES, CLR=NO
ENTER=YES, CLR=NO ENTER=YES, CLR=NO
ETSL EFTPOS ETSL EFTPOS
4.2 ETSL ETSL EFTPOS EFTPOS
MEMORY RESET MEMORY RESET
MEMORY RESET MEMORY RESET
MULTI MERCHANT MULTI MERCHANT MULTI MERCHANT MULTI MERCHANT
5.0
SETUP SETUP
SETUP SETUP
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE
Press FUNC
Enter 7418, press ENTER
Terminal is now in configuration mode. Go to following steps to proceed or press
CANCEL to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
Press 8 to Delete Terminal Configuration
To delete the Terminal Configuration of the entire active merchants, press ENTER
or CLEAR to return to MULTI MERCHANT SETUP screen.
Press ENTER to proceed with deleting the entire active merchants terminal
configuration or CLEAR to return to MULTI MERCHANT SETUP screen.
This message will be displayed on the terminal for few seconds when resetting the
memory to factory default.
Terminal is now in configuration mode. Press CANCEL to exit, otherwise the
terminal will automatically exit after 30 seconds of inactivity
PAGE 34 OF 97
Version 1.3