Settlement Cutover - Ingenico 5100 Operating Manual

SKYZER TECHNOLOGIES
4.13.3

Settlement Cutover

This function allows the merchant to settle the current settlement period and to
cut over to a new settlement period. This can only be performed successfully
when the terminal is within the 'settlement window' defined by Paymark for the
particular merchant and terminal.
Step Terminal Display Description
ADMIN ADMIN
1.0 ADMIN ADMIN
TOTL TOTL INQ INQ
TOTL TOTL INQ INQ
2.0 1 Merchant 1 1 Merchant 1 1 Merchant 1 1 Merchant 1
2 Merchant 2 2 Merchant 2
2 Merchant 2 2 Merchant 2
3 Merchant 3 3 Merchant 3 3 Merchant 3 3 Merchant 3
3.0
CUTOV CUTOVER NOW? ER NOW?
CUTOV CUTOV ER NOW? ER NOW?
ENTER=YES, CLR=NO ENTER=YES, CLR=NO ENTER=YES, CLR=NO ENTER=YES, CLR=NO
PROCESSING NOW PROCESSING NOW
4.0 PROCESSING NOW PROCESSING NOW
TRANS. COMPLETE TRANS. COMPLETE TRANS. COMPLETE TRANS. COMPLETE
5.0
NOTE: Any stored Tipping, EOV offline and/or Contactless transactions, will be
prompted to upload when Settlement Cutover is performed. To upload these
stored transactions at that time, press ENTER or CLEAR to cancel upload and
proceed with Settlement Cutover.
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE
Press ENTER until ADMIN menu is shown on the display.
Press CR key to select CUT.
CUT CUT
CUT CUT
Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by
ENTER.
Press ENTER to initiate a settlement cutover or CLEAR to cancel and return to the
previous state.
NOTE: Terminal will prompt for any stored Tip Transactions and/or Electronic Offline
Voucher to be transmitted. Press ENTER to transmit or press CLEAR to proceed with
settlement cutover.
PROCESSING NOW will be displayed on the terminal while processing the
transaction.
Settlement cutover record is printed.
PAGE 81 OF 97
Version 1.3