Uploading Tip Transactions - Ingenico 5100 Operating Manual

SKYZER TECHNOLOGIES
4.10.3.2

Uploading Tip Transactions

This function is used by the merchant to transmit all stored credit card tip
transactions.
Step Terminal Display
TIPPING TIPPING
1.0 TIPPING TIPPING
AUTH AUTH ADJ ADJ
AUTH AUTH ADJ ADJ
SELECT FUNCTION SELECT FUNCTION
2.0 SELECT FUNCTION SELECT FUNCTION
1. VOID TIP 1. VOID TIP
1. 1. VOID TIP VOID TIP
2. UPLOAD 2. UPLOAD 2. UPLOAD 2. UPLOAD
3. PRI 3. PRINT NT
3. PRI 3. PRI NT NT
3.0 TIP TRANSACTIONS TIP TRANSACTIONS TIP TRANSACTIONS TIP TRANSACTIONS
TOTAL TOTAL TOTAL TOTAL $XX.XX $XX.XX $XX.XX $XX.XX
TOTAL OK? Y/N TOTAL OK? Y/N TOTAL OK? Y/N TOTAL OK? Y/N
4.0
PROCESSING NOW PROCESSING NOW
PROCESSING NOW PROCESSING NOW
X OF XX X OF XX
X OF XX X OF XX
TRANSMISSION TRANSMISSION TRANSMISSION TRANSMISSION
5.0
COMPLETE COMPLETE COMPLETE COMPLETE
6.0
VIEW TRANS Y/N VIEW TRANS Y/N VIEW TRANS Y/N VIEW TRANS Y/N
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE
Description
Press ENTER to scroll through the menu options until the TIPPING menu is
shown on the display.
UTIL UTIL
UTIL UTIL
Press CR key to select UTIL.
Select the desired function by pressing the corresponding number key.
Example: Select 2 to perform UPLOAD FUNCTION.
Displays the total tip transactions that are currently stored on the terminal.
(NOTE: Check to see if the Total Amount matches the Total Amount of your tip
transaction receipts)
If the TOTAL is correct, press ENTER to upload the stored TIP transactions and
if the TOTAL is not correct, press CLEAR to exit and proceed with step 6.0
PROCESSING NOW X OF XX displays while uploading the stored tip
transactions and once finished, returns to idle screen.
Example: Processing 1 of 10, etc.
Once all the transactions are sent, the screen will display "TRANSMISSION
COMPLETE"
Press ENTER to view transactions to modify the tip transaction amounts of the
stored advices or CLEAR to exit and return to idle screen.
PAGE 68 OF 97
Version 1.3