Keystroke Sounds; Terminal Backlight; Idle Timer; Reset Invoice Number - Ingenico iCT250 Merchant Manual

Keystroke sounds

T his option allows you to enable or disable the beeps when keys are pressed.
1. P ress / Admin key  Setup Menu  Customization  Hardware Options  Key
. , # *
2. Select the desired option (1 - All Off or 2 - All On or 3 - Invalid Only).
» All Off – The terminal will beep on every key press. This is the default.
» A ll On – The terminal won't beep when keys are pressed.
»
I nvalid
3. The new keystroke sounds are now changed to your selection.

Terminal backlight

This option allows you determine when the screen light is on.
1.
P ress . , # * / Admin key  Setup Menu  Customization  Hardware Options  Backlight.
2.
S elect the desired option (1 - Always Off or 2 - Always On or 3 - On / Key Press).
» Always
»
Always
» On / Key
3.
The backlighting setting is now changed to your selection.

Idle timer

This option will dim the terminal after a set period of inactivity. This setting dictates how long a terminal will sit unused
before returning to the idle screen. We recommend that this be set to 60 seconds otherwise you may experience more
transactions timing out which will require you to restart from the beginning.
1. Press / Admin key  Setup Menu  Customization  Idle
. , # *
2. E nter the desired number of
seconds.
3. The idle timer maximum is now set.

Reset invoice number

Use this option to reset your invoice number to 1. This will be reflected on the printed receipts.
1. P ress . , # * / Admin key  Maintenance  Reset Menu  Reset Invoice
2. Confirm you want to reset the invoice number to 1 (Yes or No).
You cannot reset the invoice number with an open batch. Close the existing batch and then reset the invoice number.
3. The invoice number is reset to 1.
Cashback options
Use these options to configure preset cashback format and amounts.
Whenever you do a Host 2 Download, you will overwrite the cashback options with what is on the server. To ensure that your cashback
settings aren't overwritten, we suggest you call in to change them.
1. P ress . , # * / Admin key  Setup Menu  Customization  Transaction Options  Cashback Options 
and select one of the following:
Cashback
Use this option to enable/disable cashback functionality.
a) Cashback is enabled/disabled.
Only – The terminal will only beep when an invalid action is performed.
On – The screen will always be lit. This is the default.
Off – The screen will always be off until a transaction is initiated.
Press – The screen will turn on when a key is pressed or a card is swiped.
seconds before your terminal enters idle mode and press OK. The default is 60
TD iCT250 Merchant Guide
Administration and Configuration
Timer.
- 25 -
Beep.
#.
5