This will extract the FILENAME.fls file in the same directory where FILENAME.exe was executed.
Be sure to copy the FILENAME.exe file to your computer's local drive before
IMPORTANT
executing commands in the Windows Command Prompt.
Web Page Download
This download method requires firmware with the .prg extension FILENAME.prg.
1. Make sure the printer is powered up, in ONLINE mode, and that the Ethernet cable is connected.
2. Get the IP address from the front panel ONLINE screen (or under Network
3. Enter the printer's IP address in your browser (e.g., http://10.224.5.21).
4. When prompted for a user name and password, enter "root" for user name and click OK.
5. Click "System" in the Configuration box.
6. Click the "Upgrade" button.
7. Browse to the directory or enter FILENAME.fls in the "File to upload" field of the Wireless Firmware
Upgrade box and click "Upgrade". A Warning message opens.
228
Figure 14 System Configuration Upgrade
Figure 15 Uploading Firmware File for Upgrade
in Settings
).