Loading Wifi Certificate File(S) From Webpage - Printronix T6000 Administrator's Manual

bdcert.lnx (ca file) > (ptx file)
5. Run bdcert.lnx with the certificate authority filename, the certificate filename, and the private key
filename redirecting the output to an output file or Run bdcert.lnx with the certificate authority filename
redirecting the output to an output file.
6. Once the output file has been generated it can be sent to the printer through any host interface while
the Printer is Online.

Loading Wifi Certificate file(s) from Webpage

NOTE:
Certificates can be loaded using the Ethernet or WLAN interface.
1. Make sure the printer is powered up, in ONLINE mode, and that the Ethernet cable is connected or the
printer is connected through the WLAN.
2. Get the IP address from the front panel ONLINE screen (or under Network
3. Enter the printer's IP address in your browser (e.g., http://10.224.5.21).
4. When prompted for a user name and password, enter "root" for user name and click OK.
5. Click "Network" in the Configuration box.
6. In the Certificates and Security Key box browse for the certificate files.
7. Enter the Certificate file in the PEM slot.
8. Enter the Certificate Authority file in the CA slot.
9. Enter the Private Key file in the Key Slot.
10. Click on the Upload button for each of the files
280
in Settings ).