Printronix T6000 Administrator's Manual page 144

Defined in linespaces, starting from line zero at the top of the page and
incrementing from the top down.
Minimum
Maximum
Factory Default
Defined in linespaces, starting from line zero at the bottom of the page and
incrementing from the bottom up.
Minimum
Maximum
Factory Default
Selecting this executable menu by pressing the
printer to print the currently selected character set.
When the printer receives a host data stream reset command (ESC @ or
ESC[K) in addition to resetting printer variables, the selected configuration is
loaded.
Disable
Power up
Config
Current config
Factory config
Factory Default
144
Application > LP+ Setup > Top Margin
0 linespaces
451 linespaces
0 linespaces
Application > LP+ Setup > Bottom Margin
0 linespaces
451 linespaces
0 linespaces
Application > LP+ Setup > Print Char. Set
Application > LP+ Setup > Reset Cmd CFG Ld
The active emulation parameters are loaded when the
reset command is executed.
The power-up configuration is loaded when the reset
command is executed.
The currently selected configuration is loaded when
the reset command is executed.
The factory installed configuration is loaded when the
reset command is executed.
Disable

ENTER key causes the