Printronix T6000 Administrator's Manual page 149

Application > P-Series Setup > Overstrike
Overstrike determines the action required when a line is printed over a
previous line because a carriage return was received without a line feed.
Replaces the characters from the first line with the
Disable
second line.
Prints the second line on top of the first line making it
Enable
bolder.
Factory Default Enable
Application > P-Series Setup > Select SFCC
This P-Series feature allows you to select an ASCII code which defines the
Special Function Control Code (SFCC) command code value. The factory
default value is hex 01, but the P-Series options allow selection of any value
ranging from hex 00 through hex 7F. This powerful feature permits the SFCC
code to be assigned a value compatible with the application environment
where the P-Series jobs originate. The most commonly used values include
the following: SOH (01 hex), ESC (1B hex), ETX (03 hex), ^ (5E hex), and ~
(7E hex).
Minimum 00 hex
Maximum 7F hex
Factory Default 01 hex
Non-Printable ASCII code values range from hex
00 through hex 1F and also include hex 7F.
Printable ASCII code values range from hex 20
through hex 7E. If a printable code value is chosen
to define the SFCC code value, you must ensure
IMPORTANT
that the printer data stream will not contain the
same code value in printable text. Otherwise text
containing the character for the SFCC control
code value may be incorrectly processed as an
SFCC command causing print errors.
Application > P-Series Setup > EVFU Select
Controls how the printer handles vertical formatting.
Disable Disables all EVFU processing.
Selects P-Series compatible Electronic Vertical Format
Enable
Unit (EVFU).
Factory Default Enable
149