Network > Wlan Params - Printronix T6000 Administrator's Manual

You can enable/disable the DHCP protocol using this option, but consult
your administrator for the appropriate setting.
Disable
Enable
Factory Default
IMPORTANT
You can enable/disable the BootP protocol using this option, but consult
your administrator for the appropriate setting.
Disable
Enable
Factory Default
IMPORTANT
Network > WLAN Params
A 1-32 character, case-sensitive string that identifies the Extended Service
Set Identification (ESS_ID) network the unit is part of (ESS_ID is also called
NET_ID). These characters can be alphanumeric, symbols, or spaces.
IMPORTANT
Allows you to reset the SSID name
IMPORTANT
Network > WLAN> DHCP
DHCP is disabled and you set your own static IP
address, subnet mask, and gateway address.
DHCP is enabled and IP address, subnet mask, and
gateway address is assigned dynamically.
Enable
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN> BootP
BootP is disabled.
BootP is enabled.
Disable
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > SSID Name
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > Reset SSID Name
If changed, the printer reboots when it is placed
ONLINE.
191