Printronix T6000 Administrator's Manual page 134

Expanded font allows you to print characters in different sizes with specified
parameters and allows you to select block or non-block font face.
Scalable
Block
Factory Default
When enabled, an FF will be generated automatically to slew to the end of
form when the ^PN command is encountered and when the current vertical
position is not at the top-of-form.
Disable
Enable
Factory Default
This option is for compatibility of the font size of the barcode printable data
field (PDF) on older firmware.
Disable
Enable
Factory Default
This option is for compatibility with mode switches for Code 128 barcodes.
Disable
Enable
Factory Default
134
Application > VGL Setup > Expanded Font
Uses Gothic font as default. Other font faces can be
selected by using the IFONT command.
Uses Block fonts.
Scalable
Application > VGL Setup > Auto FF at ^PN
No FF generated upon ^PN command.
FF is generated upon ^PN command.
Disable
Application > VGL Setup > PDF Size Comp
Uses the normal font size.
Matches the older firmware font size.
Disable
Application > VGL Setup > C128 Mode Comp.
Uses the normal auto switch for optimum barcodes.
Matches the older firmware auto switch algorithm.
Disable