Printronix T6000 Administrator's Manual page 83

System > Control > Alarm
Determines if the printer will power-up in the ONLINE state or OFFLINE state
(Home screen).
An audible alarm sounds (3 beeps) when a fault
On
occurs, such as a paper jam.
A continuous audible alarm sounds when a fault
Cont. Beep
occurs, which can be stopped by pressing PAUSE.
Off No audible alarm sounds.
Factory Default On
System > Control > Media Units
Determines if distances in the MEDIA section are displayed in inches or
millimeters.
In Inches Inches are used.
In Millimeters Millimeters are used.
Factory Default In Inches
System > Control > Batch Counter
Displays the number of pages remaining to be printed in a print job on the
ONLINE screen message area. This feature is supported in PGL and ZGL
only. Not available for the Postscript/PDF firmware.
Disable Remaining pages is not displayed.
Enable The number of remaining pages is displayed.
Factory Default Disable
PGL Syntax ~EXECUTE;formname;[;FC][;ICNTn][;FCNTn]
ZGL Syntax ^PQ(#Pages)
If the correct execute command is absent from the
print file, "0 Pages" will continually display on the
WARNING
control panel.
83