Optional Features - Printronix T6000 Administrator's Manual


Ventless System: For operation in environments with airborne particulate matter without
compromising performance.

Optional Features

Ask your authorized representative about the following enhancement options:

Andalé Fonts: A selection of four different purchasable Andale fonts can be provided (one font per SD
card). The Andale fonts will become active when the SD card is installed.

GPIO (General Purpose Input/Output): Enables a T6000 printer to interface with an external device
such as a label applicator system. GPIO is available as a factory option or field installable kit that also
includes a mating connector for field interface, installation instructions, and operation manual.

Peel Dispenser: Peels off labels one at a time before printing the next label and rewinds the liner into
a discardable roll. Peel-off is available as a factory option or field installable kit that includes a internal
label rewinder.

Internal label batch rewinder: Rewinds printed labels into a removable roll. Batch rewind is available
as a factory option or field installable kit that includes a internal label rewinder.

IPDS: The printer may be ordered with this option installed or it can be field installed by an authorized
service representative or by use of an SPX at a later date. The printer must have a 300 dpi printhead
installed to support this field installed option.

Media Cutter: Automatically cuts printed media when the media exits the printer. Available for 4 and 6
inch printers.

Media Cutter Tray: Used with the media cutter option to catch and collect the cut media in a bin.

Online Barcode Validator: Analyzes each bar code to ensure it meets stringent scanning standards.
This inspection validates the symbology and specifications of both linear and PDF417 bar code
images. Bad bar code labels are cancelled and good replacement labels are printed.

RFID MP2 Encoder: The RFID (Radio Frequency Identification) UHF encoder reads and writes
information to smart labels (with embedded RFID tags) with a pitch typically two to six inches. These
labels are used on shipping cartons and pallets.

Postscript/PDF: The Postscript/PDF firmware enables your printer to support Postscript and PDF
applications directly from the host computer making your ERP and WMS integration simple.

Parallel: Centronics®-compatible parallel, IEEE® 1284 compliant parallel.

Premium Asian Fonts: A selection of three different purchasable Asian fonts can be provided (one
font per SD card). These Asian fonts include Hanzi GB, Kanji SJIS, and Hangul, are available for use
when the SD card is installed.

QCMC (Quick Change Memory Card): The QCMC provides the ability to duplicate an entire printer's
firmware, saved configurations, and custom files quickly through the printer's control panel with a user
friendly interface.

TN5250: The TN firmware enables your printer to communicate with an IBM host through a network
interface using the 5250 datastream. This feature allows you to use an application generated for the
coax/twinax emulation to be printed through the network interface.

Wireless Network: This card provides wireless 802.11a/b/g/n connectivity without expensive cabling
and reconfigurations required from a wired network. PNE is standard with this option.
For more information about printer options, see Appendix B page 270.
13