Removing Label Liner From The Rewinder - Printronix T6000 Administrator's Manual

4. Wrap the label onto the internal rewind spindle and rotate the spindle counter-clockwise about 3~5 full
turns until the label is properly stretched tight and will not slip on the rewind spindle.
5. Lift up the peel-off roller release lever to close the front door.
6. Press down on both sides of the pivoting deck to close the printhead.
7. Press the FEED key. The label advances to the peel-off position, and "Remove Label" displays on the
LCD.
8. Manually remove the peeled label from the printer.
9. Press the PAUSE key until the ONLINE screen displays.
10. Close the media cover.

Removing Label Liner from the Rewinder

1. Open the media cover.
2. Open the peel-off front door.
3. Tear the liner at the tear bar.
4. Push the liner release button to release the liner on the internal rewind spindle.
5. Slide the roll of label liner off the rewinder and discard.
31