Printronix T6000 Administrator's Manual page 99

Application > Control > VGL Diagnostics
This menu sets the error reporting capability of VGL when selected as the
current Active IGP emulation.
Enable All Full error checking and report.
Disable No error checking and report.
Command syntax is checked and error messages
Error Msgs
printed when command parameters are incorrect.
Prints the following error markers for those elements
that print beyond the page boundaries:
>> For elements that begin off the right side of the
page.
Error Markers
<< For elements that begin at the indicated position but
end off the page.
For elements where the starting position of the
command contains an error other than an off-page
error.
Reports errors for elements that start or end beyond
Offpage Errors
the right edge of the page.
An error message will print when invalid barcode data
Barcode Errors
is encountered.
Factory Default Disable
This is only shown when VGL is the Active IGP
IMPORTANT
Emulation.
Application > Control > XXX Diagnostics
This menu sets the error reporting capability of the Active IGP Emulation
(except PGL and VGL). "XXX" is used to denote the Active IGP Emulation
ZGL, TGL, IGL, STGL, DGL, MGL, or IEGL.
Enable Full error checking and report.
Disable No error checking and report.
Factory Default Disable
For PGL, see PGL Diagnostics and for VGL, see
IMPORTANT
VGL Diagnostics instead.
99