Printronix T6000 Administrator's Manual page 140

This item allows you to select certain host commands to be ignored by the
printer.
Enable
Ignore All
Ignore CPI
Ignore LPI
Factory Default
The font style or typeface to be used when printing text.
Letter Gothic
Courier
OCR-A
OCR-B
Factory Default
Each printed character is contained inside a character cell. The width of the
character cell includes the character and the space around the character.
Disable
Enable
Factory Default
140
Application > LP+ Setup > Host Command
All host commands accepted by printer.
All commands are ignored.
All CPI commands are ignored.
All LPI commands are ignored.
Enable
Application > LP+ Setup > Typeface
Letter Gothic is a non-proportional font where all of the
characters take up the same amount of space when
printed.
Courier is a non-proportional (monospaced) font where
all characters take up the same amount of space when
printed.
Optical character recognition font prints only at 10 cpi.
Optical character recognition font prints only at 10 cpi.
Letter Gothic
Application > LP+ Setup > Prop. Spacing
Each character cell is printed with the same width.
Each column in the printed text will line up.
The width of each character cell varies with the width of
the character. For example, 'i' takes less space to print
than 'm'. Using proportional fonts generally increases
the readability of printed documents, giving text a
typeset appearance.
Enable