Host Io > Ieee-1284 - Printronix T6000 Administrator's Manual

This is the timeout value used for the current port to then check the other
selected port types for data to print. When the printer has not received data
from the host after a certain period of time, it needs to time out in order to
service the other ports. This submenu is only available when Host IO >
Control > Interface is set to Auto Switching.
Minimum
Maximum
Factory Default
Host IO > IEEE-1284
IMPORTANT
This submenu will not be available unless the parallel option card is installed.
Same as Host IO > Centronics > Buffer (Kbytes).
Same as Host IO > Centronics > Prime Signal.
Same as Host IO > Centronics > TOF Action.
Same as Host IO > Centronics > Offline Process.
Same as Host IO > Centronics > Report Status.
Same as Host IO > Centronics > Auto Trickle.
174
Host IO > Centronics > AutoSW Timeout
10 second
60 seconds
10 seconds
Host IO > IEEE-1284 > Buffer (Kbytes)
Host IO > IEEE-1284 > Prime Signal
Host IO > IEEE-1284 > TOF Action
Host IO > IEEE-1284 > Offline Process
Host IO > IEEE-1284 > Report Status
Host IO > IEEE-1284 > Auto Trickle