Network > Ethernet - Printronix T6000 Administrator's Manual

This menu determines when the autoswitching process will start.
Data Timeout
Session Close
Factory Default
Network > Ethernet
WARNING
Most of these menu items will not change until configuration of the printer is
deemed complete by the user and the printer is placed ONLINE. Upon going
online, the printer will automatically reboot and set these options.
This item allows you to set the IP Address for the TCP/IP protocol using a
virtual keyboard. Make sure you enter the complete IP address, including the
period symbol between the segments.
Structure
Factory Default
IMPORTANT
IMPORTANT
186
Network > Control > AutoSW Out
Allows Autoswitching when no data has been received
for the selected Time Out period.
Allows Autoswitching only when the Network Socket is
closed.
Data Timeout
Network > Ethernet > IP Address
Seg1.Seg2.Seg3.Seg4
000.000.000.000
Disable BootP, ARP or DHCP before trying to
change the IP address.
If changed, the printer reboots when it is placed
ONLINE.