Table of Contents
Advertisement
Using a T-15 Torx screwdriver, remove the PCIe expansion board option installed on the PCI riser
15.
board assembly.
To replace the component, reverse the removal procedure.
Cache module
To remove the component:
Power down the server (on page 28).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 28).
3.
Place the server on a flat, level work surface.
4.
Disconnect the intra-tray signal cable from the power expander board.
5.
Remove all drives from drive cage assembly 2
6.
Remove drive cage assembly 2
7.
("Removing and replacing a
("Drive cage assembly
2" on page 58).
drive" on page 35).
Removal and replacement procedures 53
Advertisement
Table of Contents
