Table of Contents
Advertisement
Remove the I/O module.
4.
To replace the component, reverse the removal procedure.
Dual FlexibleLOM riser options
To remove the component:
Power down the server associated with the I/O module
1.
Remove the server associated with the I/O module
2.
Remove the I/O module (on page 33).
3.
Using a T-10 Torx screwdriver, remove the I/O module FlexibleLOM adapter.
4.
To replace the component, reverse the removal procedure.
("Power down the
server" on page 28).
("Remove the
server" on page 28).
Removal and replacement procedures 39
Advertisement
Table of Contents
