Table of Contents
Advertisement
Disconnect the intra-tray signal cable from the power expander board.
5.
Remove all drives from drive cage assembly 2
6.
Remove drive cage assembly 2
7.
Disconnect and remove the drive cables connected to drive cage assembly 2
8.
page 91).
Remove the rear accelerator cage
9.
Remove the front accelerator cage
10.
Disconnect all accelerator cables from the power expander board
11.
page 94).
Remove the upper server tray (on page 29).
12.
Remove the PCIe riser board assembly.
13.
Disconnect all cables connected to existing expansion boards.
14.
To replace the component, reverse the removal procedure.
("Removing and replacing a
("Drive cage assembly
2" on page 58).
("Accelerator
(rear)" on page 44).
("Accelerator
(front)" on page 40).
drive" on page 35).
("Drive
("Accelerator option
Removal and replacement procedures 51
cabling" on
cabling" on
Advertisement
Table of Contents
