Table of Contents
Advertisement
Disconnect and remove the drive cables connected to drive cage assembly 2
8.
page 91).
Remove the rear accelerator cage
9.
Remove the front accelerator cage
10.
Disconnect all accelerator cables from the power expander board
11.
page 94).
Remove the upper server tray (on page 29).
12.
Remove the PCIe riser board assembly
13.
Remove the PCIe expansion board.
14.
Disconnect the cable from the cache module.
15.
Remove the cache module from the controller.
16.
To replace the component, reverse the removal procedure.
HPE Smart Storage Battery option
To remove the component:
Power down the server (on page 28).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 28).
3.
Place the server on a flat, level work surface.
4.
("Accelerator
(rear)" on page 44).
("Accelerator
(front)" on page 40).
("PCIe riser board
("Drive
("Accelerator option
assembly" on page 50).
Removal and replacement procedures 54
cabling" on
cabling" on
Advertisement
Table of Contents
