Accelerator (Front) - HPE ProLiant XL250a Gen9 Maintenance And Service Manual

Accelerator (front)

To remove the component:
Power down the server (on page 28).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 28).
3.
Place the server on a flat, level work surface.
4.
Remove all drives from drive cage assembly 2
5.
Remove drive cage assembly 2
6.
Disconnect and remove the drive cables connected to drive cage assembly 2
7.
page 91).
Disconnect the accelerator cable from the power expander board
8.
page 94).
Remove the front accelerator cage.
9.
Remove the accelerator from the accelerator cage.
10.
("Removing and replacing a
("Drive cage assembly 2" on page 58).
drive" on page 35).
("Drive
("Accelerator option
Removal and replacement procedures 40
cabling" on
cabling" on