Table of Contents
Advertisement
Disconnect the intra-tray signal cable from the power expander board.
5.
Remove all drives from drive cage assembly 2
6.
Remove drive cage assembly 2
7.
Disconnect and remove the drive cables connected to drive cage assembly 2
8.
page 91).
Remove the rear accelerator cage
9.
Remove the front accelerator cage
10.
Disconnect all accelerator cables from the power expander board
11.
page 94).
Remove the upper server tray (on page 29).
12.
Remove the front PCI riser board assembly
13.
Disconnect the Smart Storage battery from the system board.
14.
Remove the Smart Storage battery.
15.
To replace the component, reverse the removal procedure.
To locate the Smart Storage battery on the system board, see "System board components (on page 86)."
("Removing and replacing a
("Drive cage assembly
2" on page 58).
("Accelerator
(rear)" on page 44).
("Accelerator
(front)" on page 40).
("PCIe riser board
drive" on page 35).
("Drive
("Accelerator option
assembly" on page 50).
Removal and replacement procedures 55
cabling" on
cabling" on
Advertisement
Table of Contents
