Remove the accelerator from the accelerator cage.
8.
To replace the component, reverse the removal procedure.
IMPORTANT: If replacing an NVIDIA Tesla M60 dual-GPU accelerator, be sure you are
replacing it with the correct model for the location. Install the NVIDIA Tesla M60 (J0X21A) in
the front panel; install the NVIDIA Tesla M60-RAF (M3F67A) in the rear panel.
Power expander board
To remove the component:
Power down the server (on page 28).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 28).
3.
Place the server on a flat, level work surface.
4.
Remove the upper tray support bracket
5.
30).
("Remove the upper server tray support
Removal and replacement procedures 45
bracket" on page