Disconnect the intra-tray signal cable from the power expander board.
6.
Disconnect the drive power cable and the accelerator cables from the power expander board. For
7.
more information, see "Cabling (on page 91)."
Remove the power expander board.
8.
To replace the component, reverse the removal procedure.
Processor air baffle
To remove the component:
Power down the server (on page 28).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 28).
3.
Place the server on a flat, level work surface.
4.
Removal and replacement procedures 46