Appendix-4 Error Messages - YASKAWA mp2500 User Manual

Appendixes
Builder

Appendix-4 Error Messages

The error messages displayed in Builder and their respective solutions are
shown below (sorted alphabetically).
A
Allocation range duplicates with
other items.
Address after replacement is not
set.
Address input format is not correct.
Input address again using correct
format and applicable type (bit,
word etc.).
Address is not set.
Address setting after replacement
is not correct.
Address setting is not correct.
Address type of start address and
end address is not the same.
Address will exceed limit. Pasting
aborted.
B
Background file error
BMP file of the compressed format
is not supported.
C Can not be imported. Do you want
to ignore error and continue
operation?
Can not create a frame inside a
frame.
Can not create any more frames.
Can not create any more new
screens.
Message
Appendix − 6
Appendix-4 Error Messages
Solution
Set address without duplicating with other
allocations.
Set address with using [Device layout] box
so as not to duplicate the range of
allocation.
The top number of the address that is to be
replaced must be specified in the [Replace
With (Start Address)] field of the [Replace]
dialog box.
Specify using the correct format for the
address. Use the [Address Setting] dialog
box to set it correctly.
Set the address in the [Address Setting]
dialog box
Set the address of the [Replace With (Start
Address)] field within range.
Specify the correct address.
Set the [Start Address] field so that it is the
same type of address as the [End Address]
field.
Verify the address range and set the
address accordingly.
Check if the background file (BMP, JPEG,
DWG) is corrupted.
Use an uncompressed BMP file.
There is a setting error in the CSV file you
are attempting to import. Click "No" to
cancel the import and repair the CSV file.
Click "Yes" to continue the import and then
use the property setting dialog box to
repair the file.
Place the frame outside of the frame.
Limit the number of frames in a single
screen to within 10.
Limit the number of user screens to within
256 screens per project.