Chapter 5 Operating Objects
Builder
M
E
M
O
M
E
M
O
M
E
M
O
♦
The shortcut key is [Ctrl] + [X].
How to select multiple objects
1) Click the objects while pressing the [Shift] key.
2) Use the cursor to enclose the objects.
♦
Perform the following setting if a confirmation dialog box is not necessary
every time the Cut function is used.
1) Select [Options] from the [Tools] menu.
2) The [Options] dialog box is displayed. Select the [Edit/Disp] tab, then
uncheck the [Display confirmation dialog when deleting objects] box.
Click while
pressing the
[Shift] key.
5 − 21
5-4 Edit Operations