YASKAWA mp2500 User Manual page 256

Chapter 8 Test
Builder
Monitor screens
Opens the monitor screens to monitor the status of shared memory.
Opening a monitor screen
1. Select the shared memory to monitor from [SMEM batch monitor] in
the [Online] menu.
2. The [Memory Setting] dialog box is displayed. Specify the start number
of the address to be displayed in the monitor screen.
3. The monitor screen is displayed.
Bit memory monitor screen
Word memory monitor screen
Repeat the above procedures to display multiple monitor screens.
8-3 Shared Memory Batch Monitor
Set the start address.
Bits that are ON are
displayed in yellow.
8 − 10
Positions that appear "pressed in"
indicate shared memory that has
been selected.