Table of Contents
Advertisement
Chapter 5 Operating Objects
Builder
3. Click the [Replace] button to display the confirmation dialog box.
Click the [Yes] button.
4. A dialog box is displayed when the replace process is completed.
Click the [OK] button.
M
E
M
O
M
E
M
O
M
E
M
O
♦
The shortcut key is [Ctrl] + [H].
♦
If the "Range" is set to include the "Whole Project", the following types of
addresses can be changed.
・[Flicker Settings] on the [Setting] menu
・[Alarm/Event Settings] on the [Setting] menu
・[Data Log Settings] on the [Setting] menu
・[Data Block Settings] on the [Setting] menu
・[RUN Parameter Setting] on the [Setting] menu
・Project macro
・Screen macro
♦
If a bit register is changed, bits are used in the substitution.
Examples of addresses in a search:
Leading bit in original communications address: 1:SB0.0
Last bit in original communications address: 1:SB0.F
Leading bit in address after change: 1：MB1.5
In this case, 1:SB0.0 to 1:SB0.F are changed for 1:MB1.5 to 1:MB2.4.
5 − 30
5-4 Edit Operations
Hide quick links:
Advertisement
Table of Contents
