Arrange - YASKAWA mp2500 User Manual

Chapter 12 Editing the Background
Builder

12-8 Arrange

This section describes the functions that are used for adjusting the size
and position of the shapes in the screen.
Arrange functions
The items set with this function are shown below.
Setting item
Bring to front
Send to back
Rotate
Turn over
Group
Ungroup
Change poly's shape Changes nodes of polygon/lines shapes as well as Bezier
Adjust the angle of
arc
Align
Procedure
Bring to front/Send to back
1. Select a shape.
2. Select [Bring to front] or [Send to back] from the [Arrange] menu.
M E M O
M E M O
M E M O
♦
The same operation can be performed by selecting [Bring to front] or [Send to
back] from the pop-up menu displayed when right-clicking the selected
shape.
♦
All the shapes in the Background Editor are placed in order according to the
virtual depth of the display screen. When two shapes are overlapping each
other, the top shape hides the overlapping section of the lower shape.
However, the order of the shapes can be changed by using the [Bring to
front]/[Send to back] functions.
When multiple shapes are overlapping each other, their order can be
changed using the [Move to Front]/[Move to Back] function.
Moves the shape in back to the front.
Moves the shape in front to the back.
Rotates the shape 90 degrees counterclockwise.
Turns over the shape vertically/horizontally .
Associates multiple shapes into a single group.
Releases grouped objects.
curves (connects smooth curves with nodes).
Adjusts the center angle of fan/arc shapes.
Aligns the positions of multiple shapes.
12 − 21
Contents
12-8 Arrange