YASKAWA mp2500 User Manual page 341

Appendixes
Builder
C Can not create any more screens.
Can not open any more screens.
Close other screen to open new
screen.
Can not register data to 1 folder
anymore. (Max: 4096)Register it to
other folder.
Can not restore to the currently
edited project.
Can not set this address.Please set
other address.
Can not startup editor.Check the
setting at [Tools] - [Options] -
[Editor].
Character string is not set.
CSV file xx is not correct (Line: xx,
Row: xx).
Currently edited project can not be
deleted.
E End address setting is not correct.
End page No. is out of range.Set a
number from 0 to 255.
End page No. is smaller than the
start page No.
End sheet No. is out of range.Set a
number from 0 to 9.
Enter the button label.
F Failed to create new folder.
Failed to delete.
Failed to export CSV file.
Message
Appendix − 7
Appendix-4 Error Messages
Solution
Limit the number of user screens to within
256 screens per project.
Up to 16 screens can be displayed
simultaneously in the Edit screen. Close
any unnecessary screens and try again.
Click the [New Category] button in the
[Library] dialog box, then register the
object to the newly created category.
Open another project or restart Builder
and then try again.
Specify the correct address.
Check if an editor is specified in the
[Editor] tab in [Options] of the [Tools]
menu, or if the specified execution file is
correct.
Specify the string to search for in [Find
What] of the [Find] dialog box.
Correct the error in row xx, column xx of
the CSV file xx you tried to import, and try
again.
Open another project or restart Builder
and then try again.
Specify the top number of the address that
is to be replaced in [End Address] of the
[Replace] dialog box.
The end page number is 255. Set the screen
page number between 0 and 255.
Reset the start page number so that it is
smaller than the end page number.
The sheet screen page number must be
between 0 and 9.Reset the sheet screen
page number between 0 and 9.
In the [Button label editing] dialog box,
enter [YES button label] or [No button
label].
Failed to save the file probably due to
insufficient free space in the hard
disk.Increase the amount of free space in
the hard disk and try again.
Check if the specified category or file is
being used by another project and try
again. If not, then the data may be
corrupted.
Failed to generate file probably due to
insufficient free space in the hard disk.
Increase the amount of free space in the
hard disk and try again.