YASKAWA mp2500 User Manual page 74

Chapter 3 Operating the Project File
Builder
Backup
1. Select the [Backup] tab.
2. Select the project to back up.
Number
1) Backup
2) Folder Name
3. Click the [Execute] button. A confirmation dialog box will be displayed.
Click the [Yes] button to back up the project.
4. If the backup destination is a floppy disk, the number of floppy disks
required will be displayed. If 2 or more floppy disks are required,
change the disks when prompted by a message on the screen.
Item
Sets the full path for the project file to be backed up.
Automatically displays project files that have been opened
with Builder.
Saves the backup file to floppy disk when "Floppy Disk" is
selected. In this case, prepare the specified number of 1.44MB
floppy disks.
Saves the backup file to the selected folder when "Folder" is
selected.
Creates the file "ProjectName.XXX" (where XXX = 000, 001,
...) at the backup destination when a backup is executed.
3 − 18
3-8 Project Maintenance
1)
2)
Contents