Chapter 5 Operating Objects
Builder
Property setting
The properties of the shapes are set in the properties dialog box of each
shape.
1. Select the shape to set its properties.
2. Perform one of the following procedures:
Position the cursor on the shape and double-click it.
Select the shape and select [Object Properties] from the [Settings]
menu.
Select the object and right-click to display the pop-up menu, then
select the properties menu of the shape. (The menu name differs for
each shape.)
3. The dialog box for setting the shape properties is displayed.
Set the necessary items in each tab.
4. Click the [OK] button after setting the necessary items.
Double-click
5 − 16
5-2 Creating Shapes