YASKAWA mp2500 User Manual page 344

Appendixes
Builder
N No. of items for vertical (Line) is out
of range. Set from 1 to 40 including
item name.
Number of function objects inside a
table exceeds the maximum limit
(256).
Number of characters are
exceeding the limit. Set within x
characters.
O Operation failed.
P Please enter an integer between xx
and xx.
Project name is not set.
Project of the same name exists. Can
not create new project.
Please enter an integer.
R
Restore source data does not exist.
Check the data.
S
Screen is not open.
Setting is too short.
Setting is incomplete.
Sheet page No. is out of range. Set
a number from 0 to 9.
Specify the file which file name is
within 12 characters (8+3 format).
Start address is larger than the
end address.
Message
Appendix − 10
Appendix-4 Error Messages
Solution
The number of vertical items in a table can be
set from 1 to 40. Reset the number of vertical
items to a value within this range.
Reduce [Horizontal] or [Vertical] settings of
[No. of Items] in the [Table Setting] dialog
box so that the number of functional objects
that can be created in the table is limited to
256.
Specify within x characters.
Check if the specified category or file is being
used by another project and try again. If not,
then the data may be corrupted.
Enter an integer within the range.
Specify the project file name that is to be used
for the process.
Correctly specify an existing file name in the
project maintenance.
Specify or create another folder then save the
project file.
Enter an integer, starting with 0.
Check if the restore data is specified
correct.
Select [Whole Project] for the [Check What]
in the [Validation] dialog box and try again,
or open the screen you want to check and
try again.
Re-enter the information. The setting must
be characters or more.
Select an object that has not yet been
selected.
In the Device layout box, enter the address
for the object.
Re-enter the information.
Reset the sheet page number between 0
and 9.
When specifying a file in the property
setting dialog box such as when selecting a
list, set the file within 12 characters (8+3
format).
Set a number for the [Start Address] field
so that it is smaller than the number of the
[End Address] field.