YASKAWA mp2500 User Manual page 343

Appendixes
Builder
I ID number duplicates.
Select an ID number in the [ID
Specification] tab of [Extensive
setting] in the functional object
property dialog box.
ID number is not set.Please be sure
to set this item.
ID number is out of range.Specify
the value from 0 to 9999.
Import data of screen page No. xx
is not found in CSV file xx.
Incorrect setting, the minimum
value is larger than the maximum
value.
Incorrect project is specified. Select
correct project.
In the Device layout box, enter the
address within the allowable range
in the Leading box.
L
Layout range over.
M Maximum or minimum value is
exceeded?
Memory for undoing/redoing
operation is insufficient. Increase the
free memory by closing other screens
or exiting other applications etc.
N No items are selected.
No. of Addresses to find is out of
range.
No. of items for horizontal (Row) is
out of range. Set from 1 to 30
including item name.
Message
Appendix − 9
Appendix-4 Error Messages
Solution
♦
Checking the ID number
・ On the [Tools] menu, click [Functional
Object Used]. Sort the objects by the
column of the ID number.
・ Change the ID display from [View] to
[Show ID].
Set the ID number in the [ID Specification]
tab of [Extensive setting] in the functional
object property dialog box.
Set the ID number (between 0 and 9999) in
the [ID Specification] tab of [Extensive
setting] in the functional object property
dialog box.
The number of screens defined in the
import data varies from the number of
screen pages in the destination project. If
the number of screens in the import data is
fewer, temporarily move the extra screen
files to a separate folder and try again.
The lower limit value is larger than the
upper limit value. Set upper limit and
lower limit values correctly.
Correctly specify an existing file name in
the project maintenance.
The address of the leading bit is not set
within the allowable range.
In the Device layout box, re-enter the
address so it is within the allowable range.
Reduce the layout points, or move leading
address for the allocated register.
Select [Layout points] and [Start No.]
without exceeding a range of address for
the closing address with using [Device
layout] box.
Set within the upper and lower limits.
Increase free memory by closing other
screens or applications and try again.
Select the item(s) and try again.
Reset the address of the address search
range.
The number of horizontal items in a table can
be set from 1 to 30. Reset the number of
horizontal items to a value within this range.