YASKAWA mp2500 User Manual page 57

Chapter 3 Operating the Project File
Builder
3-1 About Project
For this product, a "project" refers to the screen data displayed in Run.
A project consists of mainly two parts: the folder where the bitmap files
are stored and the project file.
Sample
Sample.IPP
∗ The user can edit these files using a text editor. The other files are
created by the product; therefore they cannot be edited by a text editor.
When saving a file under the name "Sample", a folder named "Sample"
and the file "Sample.IPP" are created in the "(Builder installation
directory)\MyProj\" path unless specified otherwise.
Select a file with the IPP extension to open an existing project.
pnlpg###.ipw(###=000-0FF)
pnlpg###.ipw(###=FFF-FF6)
unitcom.txt
massage.ipm
pnlalarm.alm
datalog.cfg
dblk.cfg,dblk###.cfg(###=000-099)
xxx.vec
xxx.bmp*, xxx.jpg*, xxx.dwg
xxx.ini*
xxx.bmp*, xxx.jpg*
DataFile
xxx.txt*
xxx.lst*
xxx.csv*
3 − 1
3-1 About Project
Screen file
Sheet file
Unit&scale setting file
Write confirmation message
setting file
Alarm/Event setting file
Data log setting file
Data block setting file
Shape specification diagram data
file
Bitmap/JPG file for backgrounds
and DWG file.
Start setting file
Bitmap/JPG file for backgrounds
and bitmap object displays
DWG file for background displays
Text file for label object display
string setting
Text file for list selection display
string storage
CSV file for data block
Project data file