YASKAWA mp2500 User Manual page 173

Chapter 5 Operating Objects
Builder
Communication Address Settings
Select the communications address in one of the following formats.
MP2500
[Target ID] ： [Register classification] [Register type] [Address]
Item
Target ID
Register
classification
Register type
Address
Bit number
Mode
Example:
M E M O
M E M O
M E M O
♦
The target ID may be omitted. If so, make sure that the motion card is
mounted in slot 1 before using it.
♦
If the MP2500 register has been set to "MP2100/MP2500-1 slot", the target
ID is not displayed in the Builder program.
[Bit number] [Mode]
Select 1 if the motion card is in slot 1 and select 2 if the motion card is
in slot 2.
Select the register classification.
Classification Address domain
S 0 to 8191
I 0 to FFFF
O 0 to FFFF
M 0 to 65534
Select the register type. .
Classification Explanation
B Bit
W Word(2Byte)
F Float(4Byte)
L Long(4Byte)
Select an address.
If B is specified as the register type, enter a hexadecimal number as the
bit number. If the setting for the bit number is omitted, the bit number
is set to zero (0) by default.
If using a high-speed protocol, add an at sign, (@).
1:SB0.A、2:IBA.0@
1:OW1E、2:MF30@, 1:SL40
5 − 51
5-7 Address Setting
Meaning
Explanation
System register
Input/motion register
Output/motion register
Global register