YASKAWA mp2500 User Manual page 118

Chapter 4 Screen Types and Operations
Builder
Number
3)
[Control Flag] tab
Controls the enable/disable input and show/hide settings of all objects in
the frame page.
Item
Input
Display
M E M O
M E M O
M E M O
♦
If a frame has been hidden, input is not accepted even if "Input" has been
set for objects in the frame.
♦
If the address is specified indirectly, the input and display settings are
controlled in the following manner.
When setting the bit address
ON : Enable input, show
OFF: Disable input, hide
When setting the word address
0: Enable, show
Value other than 0: Disable, hide
Item
Select the tab position: top, bottom, right, left
Tab
UP
Position
LEFT
Tab Height Specifies the tab height in units of 18 dots.
Example:
Enables/disables all object input within the frame, or it is
indirectly specified by the address.
Shows/hides all objects within the frame, or it is indirectly
specified by the address.
4 − 39
Contents
DOWN
RIGHT
When tab height = 1, 18 dots
When tab height = 2, 36 dots
Contents
4-4 Frames