Exporting Data; Export (Data) Screen - GE Sievers InnovOx Operation And Maintenance Manual

Chapter 6: Analyzer Operation

Exporting Data

You can export data from the Analyzer directly to a computer or to a computer network using an Ethernet
connection.
To collect the data on a computer using HyperTerminal, refer to "Appendix C: Transferring Data to a PC" for
connection instructions. Appendix C also describes how to import exported data into a spreadsheet program.
To export data history
To export data using the Ethernet port, you must first configure the Analyzer's IP address (see "Connecting the
Analyzer to a Network Via Ethernet" on page 137).
1. Select the Data tab, and then press the Export button. The Export screen appears.
2. Press the Range button to select the time frame for the data to export. The following buttons appear on
the right:
• 1 Day
• 1 Week
• All
• Custom (Enter a specific date and time range.)
GE Analytical Instruments ©2013
Figure 35: Export (Data) Screen
134 of 238 DLM 68100-06 EN Rev. A