Table 1 Analog Outputs (Tb1) - GE Sievers InnovOx Operation And Maintenance Manual

Chapter 4: Installation
N :
4-20 mA outputs are isolated from system ground.
OTE
4-20 mA outputs are not individually isolated from each other and, therefore, are not intended to be
connected to multiple systems with differences in ground potential.
4-20 mA outputs may be configured by the user to output NPOC, IC, TC, or TOC ppm levels.
GE Analytical Instruments ©2012
Table 1: Analog Outputs (TB1)
Pin Signal
1 Analog 1 (+)
2 GND_ISO (-)
3 ANALOG 2 (+)
4 GND_ISO (-)
5 ANALOG 3 (+)
6 GND_ISO (-)
7 ANALOG 4 (+)
8 GND_ISO (-)
9 ANALOG 5 (+)
10 GND_ISO (-)
11 ANALOG 6 (+)
12 GND_ISO (-)
Table 2: Binary Input (TB2)
Pin Signal
1 BININ1+
2 BININ1-
3 BININ2+
4 BININ2-
5 BININ3+
6 BININ3-
75 of 238
Function
4-20mA Stream #1
4-20mA Stream #2
4-20mA Stream #3
4-20mA Stream #4
4-20mA Stream #5
RESERVED
Function
Start/ Stop
RESERVED
RESERVED
DLM 68100-06 EN Rev. A