Configuring Advanced Setup; Setting Analyzer Name And Location - GE Sievers InnovOx Operation And Maintenance Manual

Chapter 6: Analyzer Operation

Configuring Advanced Setup

Advanced setup consists of general parameters and periodic functions (those that will not be regularly changed
during normal Analyzer operation) on the Advanced screen, such as system properties and other settings that
are fixed for consistent periods of time.
To access the Advanced screen, select the Maintenance tab, and then press the Advanced button.

Setting Analyzer Name and Location

Specify the name and location for the Analyzer so that data history and printed output reflect the source of your
measurements.
To set a name for the Analyzer
1. Select the Maintenance tab.
2. Press the Advanced button. The Advanced screen appears.
3. Press the Analyzer Name button, and use the keyboard that appears to specify a name for the
Analyzer.
4. Press the Set Name button. The Advanced screen appears again.
To set a location for the Analyzer
1. Press the Location button, and use the keyboard that appears to specify the location of the Analyzer.
2. Press Set Location. The Advanced screen appears again. Press the Back button to return to the
Maintenance tab.
GE Analytical Instruments ©2013
Figure 40: The Advanced Screen
143 of 238 DLM 68100-06 EN Rev. A