GE Sievers InnovOx Operation And Maintenance Manual page 21

If the IP56 accessory is used with the Analyzer, do not operate the Analyzer without
the filter installed on the reactor cooling air inlet.
Before analyzing a new sample, refer to Chapter 3, Interferences, for information
on potential interferences and their effect on the Analyzer.
When handling components that contain sample, standards, waste solution, or
reagents, wear eye protection and gloves.
The display screen may contain mercury and may be considered hazardous
material in your local area. Dispose of this items in accordance with federal, state,
or local government regulations.
Always stop analysis before turning off the Analyzer.
This is a Class A product. In a domestic environment, this product may cause
electromagnetic interference in which case the user may be required to take
adequate measures to correct the interference.
If this instrument is used in a manner not specified by GE Analytical Instruments,
the protection provided by the instrument may be impaired.
Consult the MSDS that accompanies each standards set and the reagents to
identify proper disposal techniques.
GE Analytical Instruments ©2013
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
21 of 238 DLM 68100-06 EN Rev. A