GE Sievers InnovOx Operation And Maintenance Manual page 50

Chapter 2: System Description
Minimum sample flow rate
Drain
Power requirements
Typical power consumption
Normal Operating Environment
Inputs
Outputs
Alarm Relays
Communications Protocols
Installation/Overvoltage Category
Safety Certifications
Pollution Degree
Display
Size
Weight
Carrier Gas
GE Analytical Instruments ©2013
80 mL/min without optional sample pump
Gravity drain
100-240 ±10% VAC, 50/60 Hz
280 watts
Indoor use only. Keep instrument and reagents out
of direct sunlight.
Binary Input (1) for Remote Analysis Start/Stop
External USB Port (1); Internal USB Ports (2); Ethernet (1); Binary
End-of-Analysis Output (1); Isolated 4-20 mA Analog Outputs (5)
User-configurable Alarms (4); System Fault Alarm (1)
®
Modbus ; TCP/IP over Ethernet
II
CE, ETL listed. Conforms to UL Std. 61010-1
Certified to CSA C22.2 No. 61010-1
2
Color, touch-sensitive LCD
92.7 x 64.6 x 38.7 cm (36.5 x 25.4 x 15.3 in.)
H x W x D
36.3 kg (80 lbs)
CO free air or Nitrogen; Gas must be oil- and water-free;
2
Delivery Pressure of 30-100 psi required when using the air
purifier option; Delivery pressure must be regulated to 10-20 psi
when using a cylinder of purified gas; Unit will consume up to
200 cc/min in NPOC mode.
50 of 238 DLM 68100-06 EN Rev. A