Harmonic ProView 2900 Installation Manual page 52

Chapter 4: ProView 2900 Control Interfaces
Edit Value Parameter
4.2.1.4.
The parameters-sections in the explorer window display lists of editable parameters, available
for user-configuration. The edit-value parameters provides a free-text field for the user to type
the required value (from within a given range).
The edit-value parameter is divided into two sections:
Left Side - Displays the parameter's name. Measure
•
units are specified within brackets ([]) and the
available range is specified in light-blue.
Right Side - A free-text field. To edit the text, the user must click the field once, for the
•
cursor to appear. Once the cursor is displayed the user can type the requested value.
NOTE
In order for the new value to take affect the user must click the [Enter] key on the keyboard
after inserting the new value.
Select Value Parameter
4.2.1.5.
The parameters-sections in the explorer window display lists of editable parameters, available
for user-configuration. The select-value parameters display a drop-down list of available
values.
The select-value parameter is divided into two sections:
Left Side - Displays the parameter's name.
•
Right Side – A select-value field displaying the
•
currently-selected value. Clicking the downward-
arrow at the right-end of the field displays the
drop-down list of all available values.
Refresh Button
4.2.1.6.
The 'Refresh' button is located at the bottom of each screen and available at all
times. Clicking this button refreshes the web-page. This is useful for updating
changes that were configured in the front-panel.
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Web-Based Management Interface
4-9 ProView 2900 Series/SW Version 1.94