Harmonic ProView 2900 Installation Manual page 111

Chapter 6: Receiver Configuration Modules
The following figure illustrates the LNB L.O. Type screen.
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
5 5 5 5
NOTEs
The LNB L.O. type can be acquired from satellite transponder information. Most satellites use
the 'Universal' type of L.O. unless otherwise specified.
Manual configuration of the oscillator frequency is rarely used and is intended only for
advanced users.
Available LNB local oscilator types are:
UNIVERSAL (9.75,10.6) – Selects LNB universal L.O. type
•
WIDE BAND (9.75, 10.75) – Selects LNB wide band L.O. type
•
Ku-BAND – Defines Ku-Band LNB L.O. type
•
C-BAND – Defines C-Band LNB L.O. type
•
DiSEqC (9.75, 10.75) – Selects DiSEqC LNB L.O. type
•
NOTE
When selecting the Ku-Band or the C-Band local oscilator, you must manually set the L.O.
frequency (see the LNB L.O. Frequency configuration function detailed in paragraph 6.2.1.9).
LNB L.O. Frequency
6.2.3.12.
The LNB L.O. Frequency configuration parameter sets the fixed LNB oscillator frequency for
the Ku or C-Band L.O. in the LNB.
The following figure illustrates the Ku-Band Frequency screen.
1. 1. 9750 1. 1.
< < < < 850 8500000 850 850
Available frequency range is:
For Ku-Band L.O.:
•
For C-Band L.O.:
•
© Harmonic Inc. Manual p/n 101543/Ver 1.0
LNB L.O. Type LNB L.O. Type
LNB L.O. Type LNB L.O. Type
UNIVERSAL (9.75,10.6) UNIVERSAL (9.75,10.6) UNIVERSAL (9.75,10.6) UNIVERSAL (9.75,10.6)
WIDE BAND (9.75,10.75) WIDE BAND (9.75,10.75) WIDE BAND (9.75,10.75) WIDE BAND (9.75,10.75)
Ku BAND Ku BAND Ku BAND Ku BAND
C BAND C BAND C BAND C BAND
DiSEqC (9.75, 10.6) DiSEqC (9.75, 10.6) DiSEqC (9.75, 10.6) DiSEqC (9.75, 10.6)
LNB L.O. LNB L.O. Frequency LNB L.O. LNB L.O. Frequency Frequency Frequency
97500 0 0 0 00 [ 9750 9750 00 [k k k k Hz] 00 [ 00 [ Hz] Hz] Hz]
0000 - - - - 1300 0000 0000 1300 13000000> 1300 0000> 0000> 0000>
8500000 to 13000000 [KHz]
5000000 to 6000000 [KHz]
Satellite Receiver Configuration
6-26 ProView 2900 Series/SW Version 1.94