Table of Contents
Advertisement
Appendix B: IP Front-End SW Update
15. After a few seconds, power on the ProView 2900.
16. On the ProView 2900 front panel, go to Configuration
select FRONT END (IP)
17. Verify the correct upgrading of the new SW version by going in the ProView 2900
front panel to Status Receiver General and checking the SW Version
dd/mm/yy mj.mn parameter value
NOTE
If power failure occurs during upgrade, repeat the upgrade from step 1
© Harmonic Inc. Manual p/n 101543/Ver 1.0
B-2
ProView 2900 Series/SW Version 1.94
Stream Source and
Hide quick links:
Advertisement
Table of Contents
