Conditional Access - Harmonic ProView 2900 Installation Manual

Chapter 2: Introduction
Feature
Audio

2.4.4. Conditional Access

Feature
Embedded DVB-
Descrambling
DVB-CI
© Harmonic Inc. Manual p/n 101543/Ver 1.0
Specifications
Modes: stereo, joint stereo, dual channel, single channel
Analog max output level: +18 dBu @ 600Ω
Digital max output level: 0 dBFs
Attenuation control at -64 dB to 0 dB and mute
Dolby Digital (AC-3) Pass-through
Dolby Digital (AC-3) LT/RT downmixing
Linear PCM (SMPTE 302M 2000) supported over analog and digital
outputs 2/3/4 (supported in ProView 2980, ProView 2981,
ProView 2991, ProView 2992)
Dolby-E pass-through supported over digital outputs 2/3/4
(supported in ProView 2980, ProView 2981, ProView 2991,
ProView 2992)
Specifications
BISS mode-1
BISS-E
CAS-5000
Interface – 2 CI slots EN-50221 (Only 1 active simultaneously)
Maximum of decrypted programs - 1 for single decoder, and 2 for
dual decoder (in case the specific CAM supports it).
Maximum TS bitrate – 72 Mbps
CA methods: Multicrypt, Simulcrypt
CASs: Viaccess®, Irdeto®, Conax®, MediaGuard®, Nagravision®,
Cryptoworks®, VideoGuard®, OnDigital®, CODICrypt®
2-18
Characteristics and Specifications
ProView 2900 Series/SW Version 1.94